■Uses: even back, galvanized, color coated wire, clean the surface of the strip, remove the surface paint, oxide layer; change the rough surface.
■Features: high density of brush hair, strong grinding force; direct brush on the brush shaft, the brush must be sent to the processing of the company.
Bowl brush:
Bowl type brush for twisting silk bowl type brush improved supplement product. Retain and weaken the grinding force of the brush. Through changing the material and the thread of the brush wire, the problem of solving the burr and the finish of the work piece is solved, and the damage of the workpiece is reduced, and the processing efficiency is improved! The application is simple, easy to use. No restrictions on equipment requirements.
Pouring brush:
Cast disc brush is characterized by no hair loss, high density, wear-resistant, long service life, low failure rate.
Process: the use of plastic injection molding process, greatly improving the brush wire density, as well as the use of life.
Widely used in all kinds of metal machining parts surface polishing and removing burr. Pouring disc brush is widely used in all kinds of industries:
1, cold rolled sheet and galvanized / tin plate processing before and after the metal surface finishing
2, after machining deburring and chamfering
3, refrigerator compressor / air conditioning compressor parts finishing
Aluminum strip coil surface 4, strip / finishing
5, electronic circuit board in the decontamination and grinding pressure
6, automotive gear processing / engine parts to the burr electroplating and coating before the surface grinding
7, casting the surface grinding, deep hole / related hole to burr
8, military weapons cleaning
9, the surface of cylinder liner surface polishing
Abrasive products and applications:
1, brush wire using high density alumina abrasive wire or DuPont wire, combined with input 20-40% grinding material made of silk material. Products with high strength, high melting point, chemical resistance, strong, hyperbolic, concave and convex surfaces, all kinds of surface can be fully uniform grinding.
Abrasive abrasive silk silk flower, grinding head, materials and features used by Du Bangsi flower heads:
2, high durability, resilient bristles, long service life, shorten the polishing time improve the operating efficiency of equipment.
3, good acid and alkali resistance, resistance to chemical organic solvent, without destroying the original surface light solubility, low water absorption bristles, suitable for grinding, wet and dry conditions continue to wear silk, easy to use.
Tube brush:
■Tube brush apply to: mechanical parts inside the hole to burr, polishing, cleaning and finishing; pipe cleaning.
■The type of brush can be used: metal wire, abrasive wire, nylon wire.
■Can be customized according to your requirements specifications
Channel brush:
The channel brush is suitable for the workpiece with a diameter of 30mm or more. Generally used in the mechanical parts of the hole to burr, cleaning and finishing; specifically applied to the hydraulic cylinder, engine cylinder, pneumatic components, such as cross hole.
- optional brush type: metal wire, abrasive silk, nylon yarn.
- according to your demand specifications.
Copyright 2016-2025 Ningbo Zhengxue industrial brush Co. Ltd. all rights reserved. Zhejiang ICP 15038135 zhengxuebrush.com
Address: Zhejiang Province Ninghai Meilin streets should be home village telephone: 0574-65130230; fax: 0574-65136236 zip code: 315600; technical support: where the school science and technology